Figure 12 Cm 35 Sip Trunk Route Settings (Continued) - NEC Univerge SV9300 Programming Manual

SIP Trunk Programming Guide

Figure 12 CM 35 SIP Trunk Route Settings (continued)

1. Select the Trunk Route Number assigned to voice channels and click
the Read button to get current data settings.
2. YYY=161 Enter DiffServ code in hexadecimal for SIP trunk voice
packets (RTP stream).
Example: 2E = Expedited Forwarding
3. Click Apply.
Command Line Example:
CM 35161>01>2E (SIP Trunk Route Data: SIP Control QoS DiffServ EF)
Issue 1.0
17