Figure 4 Cm 0B1Xx Network Setup (Continued) - NEC Univerge SV9300 Programming Manual

Issue 1.0
8
5. Click Apply.
Command Line Example: Unit 01
CM 0B101>00>192.168.0.210
CM 0B101>01>255.255.255.0
CM 0B101>02>192.168.0.1
CM 0B101>10>NONE
CM 0B101>36>5061
The SV9300 must be reset in order for the change to take effect.

Figure 4 CM 0B1xx Network Setup (continued)

1. Select SV9300 Main/Remote Unit No. accommodating SIP Trunk
Channels, then click Read to get the current data settings.
2. FD=60 Enter primary DNS server IP Address (optional).
FD=61 Enter secondary DNS server IP Address (optional).
FD=70 Enter global IP Address (optional).
If more than 1 profile is used enter global IP address in CM BA139.

The IP addresses shown are example only and will depend on the network for

the global address and Spectrum Enterprise for DNS specific information.
Spectrum Enterprise
(Unit 01 VoIP Address)
(Unit 01 VoIP Subnet)
(Unit 01 VoIP Default GW)
(Default: Location 00)
(Default: SIP Trunk Port 5060)
SIP Trunk Programming Guide