Table of Contents
Advertisement
Fasten the user system interface cable head to the IC socket for an TFP-100B package on the user
system with the four screws (M2.6
x
12 mm; with flat washers) provided. Each screw should be
tightened a little at a time, alternating between screws on opposing corners. Take special care, such
as manually securing the IC socket soldered area, to prevent the soldered IC socket from being
damaged by overtightening the screws or twisting the components.
Cable head
User system
Figure 3 Connecting User System Interface Cable to User System
7
Advertisement
Table of Contents
