Recommended Dimensions For User System Mount Pad - Renesas FP-80B User Manual

User system interface cable for e6000 emulator
Table of Contents

Advertisement

2.3

Recommended Dimensions for User System Mount Pad

Figure 5 shows the recommended dimensions for the mount pad (footprint) for the user system with
an IC socket for an FP-80B package (IC149-080-012-B5: manufactured by YAMAICHI
ELECTRONICS Co., Ltd.). Note that the dimensions in figure 5 are somewhat different from those
of the actual chip's mount pad.
0.80 – 0.05
Figure 5 Recommended Dimensions for Mount Pad
10
26.00 (min.)
21.20 (max.)
0.80 x 23 = 18.40 – 0.1
+ 0.05
0.50
- 0.1
Unit: mm

Advertisement

Table of Contents
loading

This manual is also suitable for:

H8/3637 seriesHs3637ecf61h

Table of Contents