Table of Contents
Advertisement
2.3
Recommended Dimensions for User System Mount Pad
Figure 6 shows the recommended dimensions for the mount pad (footprint) for the user system
with an IC socket for a TNP-48 package (NLPACK048SD: manufactured by Tokyo Eletech
Corporation). Note that the dimensions in figure 6 are somewhat different from those of the actual
chip's mount pad.
Hole for a guide pin
8.2 (min.)
6.1 (max.)
5.7
2- 0.8
0.3
0.5
0.5
Figure 6 Recommended Dimensions for Mount Pad
11 = 5.5
Unit: mm
11
Advertisement
Table of Contents
