Related Manuals for 2easy CDV17D
Summary of Contents for 2easy CDV17D
- Page 1 CDV17DS INSTALLATION MANUAL(EN) 2-Wire Intercom System Read this manual carefully before using the product, and keep safe for future use.
-
Page 2: Parts And Function
Parts and Function The audio door station is designed for the CDV 2Easy 2-wire system. The 17-D is made of zinc alloy for protection against vandalism including the call button featuring a blue backlight for auxiliary illumination. The door unlock and speech LED indicator show visual verification of operation. -
Page 3: Unit Mounting
PL(White): external lock power input, connect to the power positive(power +). S1+(Yellow): lock power(+) output. S1-(Black): lock power(-) output. Unit Mounting The location of outdoor station should kept away from direct snow, rain and intense light. Accessory contents: Accessories include a screwdriver T20, one M4x10 screw, two PA4x25 screws, three PA3x25 screws, three PM3x12 screws and five screw stoppers 6x30. - Page 4 Mult Door Staton Connecton 4# Camera 3# Camera 2# Camera 1# Camera ID=11 ID=01 ID=10 ID=00 Audio Handset Bus PL S2+ S1+ S1- Bus PL S2+ S1+ S1- Bus PL S2+ S1+ S1- Bus PL S2+ S1+ S1- DIP=on,off,off A B C D DBC-4S Impedance Switch...
- Page 5 With DBC-4S Wiring Mode Audio Audio Handset Handset 3 4 5 6 3 4 5 6 Impedance OFF ON switch Code=15, DIP-6=on Code=14, DIP-6=on DIP=on,off,off Audio Audio Handset Handset 3 4 5 6 3 4 5 6 Code=12, DIP-6=on Code=13, DIP-6=on Audio Audio Handset...
- Page 6 With DT-CAM wiring mode - NOT UK The audio door station DT595A can be extended an additional CCTV camera to be a video door station. For more details about the camera, please refer to DT-CAM user instructions. DT-CAM Audio Handset Bus PL S2+ S1+ S1- DT595A Electric Lock Connecton...
- Page 7 Instructions for Lock Relay 1 Setting: Use the DIP switch and PROG button to change the unlock setting. UNLOCK TYPE 1. Set DIP‐1=ON, DIP‐2=OFF; 2. Press the PROG (Fig 1) button and hold for 3 secs (blue LED on) to activate the setup option: 1) NO relay: press the PROG button one more time.
- Page 8 DIP Switch Setting The DIP switch is designed to set the code the for door station and the monitor, there are two states for each DIP switch, please refer to the following: ON(1) OFF(0) Door station DIP setting Total 3 bits can be configured, bit-1 and bit-2 are used to assign ID code for door station, bit-3 is used to match the video impedance.The switches can be modified either before or after installation.
-
Page 9: Specification
Bit state User code Bit state User code Bit state User code code=0 code=6 code=11 3 4 5 3 4 5 3 4 5 code=1 code=7 code=12 3 4 5 3 4 5 3 4 5 code=2 code=8 code=13 3 4 5 3 4 5 3 4 5 code=3... -
Page 10: Cable Requirements
Cable Requirements The maximum wiring distance is limited in the 2Easy system. Using different cables can also affect the maximum distance achievable. The furthest monitor Audio Handset with two to four monitors Audio Audio Handset DBC-4S Handset When Monitor quantity < 20 Cable Usage Twisted cable 2x0.75 mm... - Page 12 The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved. DT-ENG-595A-V1 P120924 . Right to interpret and copyright of this manual are preserved. Printed 2012. 09...