Related Manuals for 2easy IRIS/DT39
Summary of Contents for 2easy IRIS/DT39
- Page 1 IRIS/DT39 USER MANUAL IRIS VIDEO DOOR PHONE 2-wire Series www.intelligenthomeonline.com...
-
Page 2: Parts And Functions
Introduction The monitor has a 3.9 inch screen with 800 x 480 pixel resolution. Opera- tion of the monitor functions is via two main buttons “Talk/Monitor” button on the left, “Unlock” button on the right plus four touch sensitive buttons 1, 2, 3, 4. -
Page 3: Monitor Mounting
Monitor Mounting 1. Use the screws to fix the mounting bracket on the wall 2. Hang the monitor on the mounting bracket firmly About Main Menu The main menu is your starting point for using all features of the monitor. There are printed numbers “1,2,3,4”... -
Page 4: Intercom Function
TALK/MON button allows you to commu- DS-1 00:30 nicate with the visitor for 90 seconds. To hang up, press TALK/MON button again During talking, press UNLOCK button to open the door for the visitor Manual Monitoring can be initiated at any time, even if nobody calls the doorbell Press TALK/MON button (or touch Monitor icon on the main menu to see live... -
Page 5: Ringtone Settings
Call Guard unit : A Monitor can be assigned as “Guard Unit Monitor” for Intercom with receptionist or concierge. “Guard” Monitor won’t be called by Door Station Call Transfer: use Call Transfer icon to set mobile numbers for call for- warding if TPS Telephone Interface is installed Light: use Light icon to operate external light if installed... -
Page 6: Language Settings
Monitor Time Settings Use Setup icon in main menu, Adjust Value then select ”Monitor Time” option. button to increase / de- 30sec Current: crease the value, press Exit button to save and return to the previous page Language Settings H/W: a1.2 Language 16 languages are supported. -
Page 7: Installation Setting
Restore all settings to a Default About->Restore In main menu select Icon will restore to default all changed settings Icon to cancel Restore to default Note: Restore to default operation won’t affect time and date settings H/W: a1.2 Language S/W: 00.01.00 Restore Addr:... - Page 8 Codes for programming via menu: [8000]:Master monitor [8001]~[8003]:Slave monitors 1~3 [8004]:Guard Unit [8005]:Un-do setting of guard unit [8007]:Monitor rings with no video [8006]:Monitor comes On with video [8015]:Unlock menu Off [8014]:Unlock menu On [9007]:Full-featured version [9006]:Simplified version How to set the monitor as a Guard Monitor A Monitor can be assigned as “Guard Unit Monitor”...
-
Page 9: Specification
How to enable control of 2 locks Code 8015 is used to set the unlock menu Off (default) to control one lock only Code 8014 is used to set the unlock menu On to control two locks Note: DS-1 00:30 1. -
Page 10: Warranty Card
WARRANTY CARD -10-... - Page 11 Back cover page as in our Cronus manual, please. The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved. website...