Ending "Comfort Mode - Viessmann VITODENS Operating Instructions Manual

Central heating
Comfort function
4. Tap OK/ to confirm. The frame around the
symbol is highlighted in white.
The rooms are heated to the required temperature.
■
■ Firstly, the DHW is heated to the set DHW tempera-
ture, before central heating.
■ The DHW circulation pump is switched on (if instal-
led).

Ending "Comfort mode"

Again tap on
or
or
Ends automatically when the system switches to
standard heating mode in accordance with the time
program
or
Ends automatically after 8 hours
Energy saving function "Economy mode"
Setting "Economy mode"
Tap the following on-screen buttons:
1. "Heating circuit 1 2 3" in the header to select the
required heating circuit
2.
or
Ending "Economy mode"
Again tap on
or
Ends automatically when the system switches to
reduced heating mode in accordance with the time
program
"Holiday program" energy saving function
Setting the "Holiday program" (HO2B)
Note
The holiday program applies to all heating circuits.
If you want to make changes to this, contact your local
heating contractor.
32
(cont.)
Note
The standard set room temperature continues to be
shown in the standard menu. "Comfort mode" and
the set temperature is displayed in alternation with the
boiler water temperature.
3. Tap OK to confirm. The frame around symbol
highlighted in white.
Note
You can only enable this energy saving function in
standard heating mode.
The holiday program starts at 00:00 h the day after the
departure date. The holiday program ends at 00:00 h
on the return date. This means that the set time pro-
gram is active on the days of departure and return.
is