Ventilation - Viessmann VITODENS Operating Instructions Manual

Operation
Programming unit
Buttons in the footer
or Returns you to the standard menu.
or Takes you to the previous step in the
menu or cancels a setting that has been
started.
or Calls up the help text.
or Calls up fault or service messages.
/ or / Standard menu:
Calls up the Energy cockpit or your selec-
ted Favourites.
Main menu:
Scrolls through the menu.
Energy cockpit
The Energy cockpit display area provides information
on the energy state of the heating system and its com-
ponents. For further information, see page 21.

Ventilation

In the "Ventilation" display area, you can select the
ventilation levels and the current ventilation level is
shown. For further information, see page 20.
Main menu
In the main menu, you can call up and adjust all of the
settings for the control unit's range of functions.
You can find the menu overview on page 59.
Call up the main menu as follows:
■ If the screensaver is active:
Tap the display anywhere and then tap on "Menu" or
" ".
■ If you are in the standard menu:
Tap "Menu" or " ".
From anywhere in the menu:
■
Tap on and then "Menu" or "
Fig. 7 HO2B
Header
A
Footer
B
14
(cont.)
".
When you call up the Energy cockpit for the first time,
a notification appears.
The Energy cockpit is opened once you confirm this
■
notification with OK. This notification will not appear
again.
■ If you tap on Cancel, the notification will appear
again the next time you call up the Energy cockpit.
Favourites
In the "Favourites" display you can assemble your indi-
vidual group of menu points that you use most fre-
quently. For further information, see page 26.
Fig. 6 HO2C