Selecting party mode
With this comfort function, you can
change the room temperature of a heat-
ing circuit for a few hours, e.g. if guests
stay longer in the evening. You do not
have to change any existing control set-
tings.
■ The rooms are heated to the required
temperature.
Heating circuit 1
Set room temp.
Heating program
Party mode
Economy mode
Select with
Press the following keys:
1. ä
repeatedly until the standard
menu is displayed.
2. |/~ for "Heating".
3. d
to confirm.
4. Ù/Ú
to select "Heating circuit 1"
(HC1), "Heating circuit 2"
(HC2), "Heating circuit 3"
(HC3) or "Heating cir-
cuit 4" (HC4, if installed).
5. |/~ for "Party mode".
6. d
to confirm.
The room temperature during
party mode is shown in the
display.
Comfort and energy saving functions
7. |/~ for the required temperature,
8. d
HC1
Ù
Ú
Terminating party mode
ON
Party mode ends automatically with the
Þ
next changeover to central heating with
standard room temperature, but no later
than after 8 hours.
(
If you want to terminate party mode pre-
maturely, press the following keys:
1. ä
2. |/~ for "Heating".
3. d
4. Ù/Ú
5. |/~ for "Party mode".
if you want to change the
value.
to confirm.
"Adopted" appears briefly in
the dialogue line of the dis-
play. "On" appears on the
right-hand side of the display
in the following menu.
repeatedly until the standard
menu is displayed.
to confirm.
to select "Heating circuit 1"
(HC1), "Heating circuit 2"
(HC2), "Heating circuit 3"
(HC3) or "Heating cir-
cuit 4" (HC4, if installed).
31