Changing the Room Temperature for a Few Hours Only
Setting energy saving mode
Setting party mode
The following functions enable you to change the room temperature for a few hours,
without permanently altering your control settings.
To save energy, you can reduce the normal room temperature with "Energy saving
mode" û
û .
û
û
You want to heat spontaneously with the normal room temperature and make
DHW available. For this, set to "Party mode" g .
In economy mode, the normal room temperature will be reduced automatically.
Press the following keys:
1.
/
/
for the required heating
3
circuit.
12. û
û
û
û
for "Energy saving mode".
Central heating will be enabled at any temperature you select (party temperature).
The DHW will be boosted to the set temperature.
The DHW recirculation pump is switched ON.
Press the following keys:
1.
/
/
for the required heating
3
circuit.
12. g
for "Party mode"; the party
temperature flashes.
/
for the required temperature,
13.
if you want to change the
room temperature.
Adjusting the Room Temperature
Terminating the economy mode
The economy mode ends
automatically with the next
changeover to central heating with
reduced room temperature.
If you want to prematurely terminate
economy mode, press
and û
û ; the key illumination
û
û
extinguishes.
to confirm; the temperature
14.
no longer flashes and is
saved.
Terminating party mode
Party mode ends automatically with
the next changeover to central heating
with normal room temperature, but no
later than after 8 hours.
If you want to prematurely terminate
party mode, press
g; the key illumination extinguishes.
,
, or
3
,
, or
and
3
23