Further adjustments
Naming heating circuits
You can name all heating circuits individually.
Note
The abbreviations 1, 2, 3 in the standard menu are
retained.
Tap the following on-screen buttons:
1. "Menu"/"
"
2. "Settings"
Setting the time and date
The time and date are factory-set. If your heating sys-
tem has been shut down for a prolonged period, you
may need to reset the time and date.
Tap the following on-screen buttons:
1. "Menu"/"
"
2. "Settings"
Setting the language
Tap the following on-screen buttons:
1. "Menu"/"
"
2. "Settings"
Entering the heating contractor contact details
You can enter your heating contractor's contact details.
These can then be called up under Information.
Tap the following on-screen buttons:
1. "Menu"/"
"
2. "Settings" or "Information"
Permanently selecting the default display
You can select one of the following displays as the
default display:
■
"Heating"
■
"Ventilation"
"Energy cockpit"
■
"Favourites"
■
42
3. "Rename heating circuits"
4. Select "Heating circuit 1", "Heating circuit 2" or
"Heating circuit 3" and enter the required name,
such as "Ground floor".
5. OK/
to confirm
The name assigned to the relevant heating circuit
appears in the main menu.
3. "Date and time"
4. "Date" or "Time"
5.
/
for the required value
6. OK/
to confirm
3. "Language"
4. Required language
5. OK/
to confirm
3. "Service contact details"
4. Relevant entry field
5. Enter the text in the individual fields (see page 42).
6. OK/
to confirm
Tap the following on-screen buttons:
1. "Menu"/"
"
2. "Settings"
3. "Selecting the default display"