Operation
Opening the control unit
Fig. 1
Programming unit
You can change any setting on your heating system
centrally at the programming unit of the control unit.
Note
The operating instructions are relevant for various
"display versions", which is why 2 images are shown.
If remote control units are installed in your rooms, you
can also adjust the settings at the remote control units.
Remote control operating instructions
If the controls have not been operated for a certain
time, the screensaver appears:
Fig. 2
HO2B
Standard menu
In the standard menu you can choose between 4 types
of display:
■
Default display for heating
■
Ventilation
Energy cockpit
■
Favourites
■
In the delivered condition, the default display for
"Heating" is always shown after you switch on and tap
. If you would prefer to show a different display area,
see page 42.
12
Fig. 3
HO2C
2 control levels are available:
■
The standard menu: See page 12
■
The main menu: See page 14
The programming unit is equipped with a
touchscreen. To input settings and call up information,
tap the on-screen buttons.
Call up the standard menu as follows:
■
If the screensaver is active:
Tap the display anywhere.
■
From the main menu:
Tap
.
The default display then appears.
With / you access the following display areas:
■
Energy cockpit
Favourites
■
Ventilation
■