Emissions Test Mode - Viessmann VITOTRONIC 100 Operating Instructions Manual
Heating system with control unit for operation with a constant boiler water temperature
Hide thumbs
Also See for VITOTRONIC 100:
- Installation and service instructions manual (168 pages) ,
- Operating instructions manual (64 pages) ,
- Operating instructions for the system user (57 pages)
Table of Contents
Advertisement
Emissions test mode
Emissions test mode should only be activated by your
flue gas inspector during the annual inspection.
Emissions test mode is enabled for flue gas measure-
ment with temporarily increased boiler water tempera-
ture.
The following functions are activated:
■
The burner is switched on. "Test in progress"
appears on the display
The pumps are started.
■
■
The temperature controller regulates the boiler water
temperature.
Activating emissions test mode
Tap the following on-screen buttons:
1. If required,
for the home screen
2.
for the "Main menu"
Ending emissions test mode
You have 2 options for ending emissions test mode:
■
Tap
.
or
Emissions test mode ends automatically after
■
60 minutes.
Note
Ensure that enough heat is being drawn during emis-
sions test mode.
3. "Test mode"
4.
to confirm
Emissions test mode
23
Advertisement
Table of Contents
