Description; Description Of The Fixture; Control Panel - ACME Xperior XP-16R SZ User Manual

000‐255
19
000‐255
20
000‐255
21
000‐255
000‐007
008‐015
016‐131
22 132‐167
168‐203
204‐239
240‐247
248‐255
23
000‐255
7. Troubleshooting
Following are a few common problems that may occur during operation. Here are some suggestions
for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connect power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED to see if it can be light up or not.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if they are linked properly.
2. If the DMX LED is on and no response to the channel, check the address settings and DMX
polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the unit
or the previous one.
4. Try to use another DMX controller.
5. Check to see if the DMX cables run near or run alongside to high voltage cables that may cause
C
100%  0
FOCUS
near far
FROST
0%  100%
IRIS
100%  0
SHUTTER
Shutter Off
Open
Strobe, slow  fast
Slow open, fast close
Fast open, slow close
Slow open, slow close
Random strobe
Open
DIMMER
0%  100%
29C
3. Description
3.1 Description of the fixture
3.2 Control Panel
Front view Rear view
1. Monitor (Batter Back‐up display):
2. LED:
POWER On Power on
BATTERY On Battery Status
WIRELESS On Receive the wireless signal
DMX On DMX input present
3. Button:
MENU To enter into move backward or leave the menu
UP To go backward to move up in the menu
DOWN To go to move down in the menu
ENTER To perform the desired functions
C
1. Front panel
2. Base
3. Tilt lock
4. head
5. Arm
6. Pan lock
7. Handle
6C