Table of Contents
Advertisement
Power Jack
Power Supply
1. Make sure that the piano is turned off. Before you switch the
piano on or off , turn down the volume of piano and any
connected audio equipments first.
2. Connect the power cable to the AC outlet.
3. Press the [POWER] button, the LCD will display "LOADING...",
which indicates the piano has powered on.
4. If you are ready to turn off the piano, press the [POWER] button
again.
Notes:
1. The piano will be automatically shut down in about 30 minutes if it
is not used.
2. When the keyboard is not in use or during thunderstorm, please
disconnect the power for safety purpose.
Connecting a pair of Headphones
A standard pair of stereo headphones can be plugged in here for
private practice or late-night playing.
Jack1: when a pair of headphones is plugged into the jack 1, the
sound can be heard from both headphones and speakers of
the instrument.
Jack2: when a pair of headphones is plugged into the jack 2,the
internal stereo speaker system is automatically shut off. The
sound can only be heard from headphones.
Note:
To avoid the risk of hearing loss when using headphones, please
do not play the piano with a high volume level for a long time.
Connecting an Audio Equipment
The rear-panel AUX.OUT jack delivers the output of the instrument
for connection to a keyboard amplifier, a mixing console, or tape
recorder. Use an audio cord to plug into the AUX.OUT jack located
on the rear panel then plug the other end of the cord into AUX.IN of
the amplifier.
Note:
To avoid damaging the speakers, please ensure that the volume
has been set to the minimum level before connecting the power
and other devices.
Connecting an MP3/CD Player
Connect the audio output of an MP3/CD player or other audio
source to the stereo AUX.IN jack on the rear panel.
The input signal is mixed with the piano signal, allowing you
to play along.
Connections
VOLUME
MIN
MAX
Jack1
Jack2
AUX IN
AUX OUT
MIDI IN
MIDI OUT
AUX IN
AUX OUT
MIDI IN
MIDI OUT
USB
USB
9
Advertisement
Table of Contents
