Sunny SF-RW5622 User Manual page 8

STEP 3
Attach the Support Frame (No.
28) to the Slide Rail (No. 22)
with Hex Bolt (No. 25), Flat
Washer (No. 17), and Nylon Nut
(No. 16). Affix with Small Knob
(No. 27) and Flat Washer (No.
17).
STEP 4:
Connect the Connection Wire
(No. 46) to Sensor Wire (No. 36),
then tighten the Slide Rail (No.
22) and Foot Plate (No. 15L/R)
to the Mainframe (No. 1) with
Hex Bolt (No. 14), Flat Washer
(No. 8), Large Knob (No. 2), Flat
Washer (No. 35) and Nylon Nut
(No. 9). Cover with Caps (No.
40).
Attach Hex Bolts (No. 12)
through the Pedals (No. 11) and
Flat Washer (No. 10) to the
Mainframe (No. 1). Tighten with
S19 wrench.
- - 7 - -