Related Manuals for Sunny SF-RW5634
Summary of Contents for Sunny SF-RW5634
- Page 1 MAGNETIC ROWING MACHINE SF-RW5634 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner’s manual future reference. customer service, please contact: support@sunnyhealthfitness.com...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be assured if the equipment is assembled, maintained, and used properly. -
Page 3: Exploded Drawing
EXPLODED DRAWING... -
Page 4: Parts List
PARTS LIST Description Description Screw M8*20*S6 Nut M10*1*H3*S14 Washer d8*Φ16*1.5 Bolt M6*55*15*S10 grade 8.8 Front stabilizer Handlebar seat 106*40*31 Fixing axle for mesh belt Φ10*40*Φ6.1 4L/R End cap Screw ST4.2*19*Φ8 Mesh belt wheel Screw M5*10*Φ10 Inertial wheel Nut M10*1*H8*S15 Saddle support Handlebar Φ28*1.5*440 Adjusting screw M6*40*Φ10*2.5 End cap Φ28*15... - Page 5 Pull pin Φ10*100*105 Bolt M8*90*20*S13 Limit mat U shape baffle Washer d6*Φ12*1 Nut M8*H7.5*S13 Screw M6*30*S5 Allen wrench S5 Saddle 360*250*50 Allen wrench S6 Screw M8*16*S6 Spanner S17-19...
-
Page 6: Hardware Package
HARDWARE PACKAGE #1 M8*20*S6 4PCS #52 d8 4PCS #2 d8* 16*1.5 4PCS #58 M12* 12.5*160*S19 4PCS 10*95*M6*25 1PC #65 d10* 20*2 1PC #66 M6*16*S5 1PC 10*100*105 2PCS... -
Page 7: Assembly Instructions
ASSEMBLY INSTRUCTIONS #1 M8*20*S6 2PCS #52 d8 2PCS #2 d8* 16*1.5 2PCS STEP 1: Attach the Front Stabilizer (No. 3) to the Main Frame (No. 49) using 2 Screws (No. 1), 2 Spring Washers (No. 52) and 2 Washers (No. 2). Tighten and secure with Allen Wrench (No. - Page 8 #58 M12* 12.5*160*S19 4PCS STEP 2: Fix the 2 Bolts (No. 58) into the bottom hole of Main Frame (No. 49) with Spanner (No. C). Attach the 2 Bolts (No. 58) through the Pedals (No. 57), into the upper hole of the Main Frame (No.
- Page 9 #1 M8*20*S6 2PCS #2 d8* 16*1.5 2PCS #52 d8 2PCS STEP 3: Insert the Saddle (No. 71) onto the Sliding Rail (No. 17). Attach the Rear Stabilizer (No. 14) to the Sliding Rail (No. 17) using 2 Screws (No. 1), 2 Spring Washers (No.
- Page 10 10*95*M6*25 1PC #65 d10* 20*2 1PC #66 M6*16*S5 1PC 10*100*105 2PCS STEP 4: Connect the Sliding Rail (No. 17) to Main Frame (No. 49). Lift the Main Frame (No. 49) and the Sliding Rail (No. 17) to align the holes. Then insert 2 Pull Pins (No. 67). Fix the Sliding Rail (No.
-
Page 11: Pedal Adjustment
ADJUSTMENT GUIDE PEDAL ADJUSTMENT The pedal strap is adjustable and can be personalized to fit the user’s foot size. To adjust the pedal strap, remove the Velcro end of the strap from the mesh side by pulling it upward then to the left. Once removed, you may increase the opening of the pedal strap by pulling the mesh end up and to the right. -
Page 12: Adjusting The Resistance
ADJUSTMENT GUIDE ADJUSTING THE RESISTANCE Rotate the Tension Control Knob (No. 45) clockwise to increase the level of resistance. Rotate the tension control counter-clockwise to decrease the level of resistance. Tension levels are set at Level 1 being the lowest and Level 8 being the highest. - Page 13 ADJUSTMENT GUIDE Figure A When not in use, you save space folding the Sliding Rail (No. 17). 1. Prop the Main Frame (No. 49) and pull out the 2 Pull Pins (No. 67). Insert 1 Pull Pin (No. 67) into through-hole Saddle Support (No.
-
Page 14: Specifications
EXERCISE METER SPECIFICATIONS: TIME------------------------------------------------------ 00:00 - 99:59 MIN:SEC COUNT-------------------------------------------------------- 0 - 9999 STROKES CALORIES---------------------------------------------------------- 0 - 9999 KCAL REPS/MIN (STROKES/MIN) ---------------------- 0 - 9999 STROKES/MIN KEY FUNCTION: MODE: To select the function you want. Hold the key for 4 seconds to have all function value reset (total reset).