ASSEMBLY INSTRUCTIONS
STEP 1:
Remove
Carriage
Shipping
Washers (No. 31), and Cap
Nuts (No. 32) from the Front
Stabilizer (No. 33).
Attach the Front Stabilizer (No.
33) to the Main Frame (No. 1)
with the Carriage Bolts (No. 30),
Arc Washers (No. 31), and
Cap Nuts (No. 32).
STEP 2:
Remove Stopper (No. 24) and 2
Screws (No. 45), then insert the
Seat (No. 18) onto the Slide Rail
(No.
Cushion (No. 24) to Slide
Rail (No. 22).
Attach Plate (No. 44) to the
Slide Rail (No. 22) with 2
Screws (No. 45).
- - 6 - -
the
pre-assembled
Bolts
(No.
Tubes
(A),
22),
and
tighten
30),
Arc
the