Cst Port Configuration - NETGEAR GS752TP Software Administration Manual

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Table 15. MSTP Status Information.
Field
MST ID
VID
FID

CST Port Configuration

Use the CST Port Configuration screen to configure Common Spanning Tree (CST) and
Internal Spanning Tree on a specific port on the switch.
To configure CST port settings:

1. Select Switching
The following screen displays:
2. To configure CST settings for an interface, click PORTS, LAGS, or All.
3. Select the check box next to the port or LAG to configure.
You can select multiple ports and LAGs to apply the same settings to the selected
interfaces. Select the check box in the heading row to apply the same settings to all
interfaces.
4. Configure the CST values for the selected ports or LAGs:
Description
Table consisting of the MST instances (including the CST) and the
corresponding VLAN IDs associated with each of them.
Table consisting of the VLAN IDs and the corresponding FID associated with
each of them.
Table consisting of the FIDs and the corresponding VLAN IDs associated
with each of them.
STP Advanced CST Port Configuration.
  
Configuring Switching Information
96