NETGEAR GS752TP Software Administration Manual page 66

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Field
System Capabilities
Managed Addresses
Address SubType
Address
Interface SubType
Interface Number
MAC/PHY Details
Auto-Negotiation Supported Specifies whether the remote device supports port-speed auto negotiation.
Auto-Negotiation Enabled
Auto Negotiation Advertised
Capabilities
Operational MAU Type
MED Details
Capabilities Supported
Current Capabilities
Device Class
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Model Name
Asset ID
Location Information
Description
Specifies the system capabilities of the remote system.
Specifies the type of the management address.
Specifies the advertised management address of the remote system.
Specifies the port subtype.
Identifies the port on the remote device that sent the information.
Possible values are True and False.
Displays the port speed auto negotiation support status. Possible values are
True and False.
Displays the port speed auto negotiation capabilities.
Displays the Medium Attachment Unit (MAU) type. The MAU performs
physical layer functions, including digital data conversion from the Ethernet
interface collision detection and bit injection into the network.
The supported capabilities that were received in MED TLV from the device.
The advertised capabilities that were received in MED TLV from the device.
The LLDP-MED endpoint device class. The possible device classes are:
• Endpoint Class 1. Indicates a generic endpoint class, offering basic LLDP
services.
• Endpoint Class 2. Indicates a media endpoint class, offering media
streaming capabilities as well as all Class 1 features.
• Endpoint Class 3. Indicates a communications device class, offering all
Class 1 and Class 2 features plus location, 911, Layer 2 switch support,
and device information management capabilities.
The hardware version advertised by the remote device.
The firmware version advertised by the remote device.
The software version advertised by the remote device.
The serial number advertised by the remote device.
The model name advertised by the remote device.
The asset ID advertised by the remote device.
Configuring System Information
66