Voice Vlan Port Setting - NETGEAR GS752TP Software Administration Manual

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2. Next to Voice VLAN Status, enable or disable (default) voice VLAN on the switch.
If the switch does not handle traffic from IP phones, the status must be disabled.
3. From the Voice VLAN ID list, select the voice VLAN ID to use for voice traffic.
The default value is 2.
4. In the Class of Service list, select the CoS tag value to be reassigned for packets received
on the voice VLAN when Remark CoS is enabled. The default value is 6.
5. In the Remark CoS list, specify whether to enable (default) or disable Class of Service
remarks on the selected port.
6. In the Voice VLAN Aging Time field, specify the amount of time after the last IP phone's
OUI is aged out for a specific port.
The port ages out after the bridge and voice aging time.
7. Click APPLY to send the updated configuration to the switch.
Configuration changes take effect immediately.

Voice VLAN Port Setting

To configure Voice VLAN port settings:

1. Select Switching Voice VLAN Advanced
 
Configuring Switching Information
88
Port Setting.
