Devicenet Object Classes; Class Code 0X01, Identity; Class Code 0X03, Devicenet - Siemens SITRANS F M MAGFLO series Operating Manual

DeviceNet add-on module
5. DeviceNet object
classes

5. DeviceNet object classes

5.1

Class code 0x01, identity

For class code 0x01, the following instance ID's are available:
Instance Name
0 Class designator
1 Identity
For class code 0x01, the following instance attributes have been implemented:
Attribute Access
1 Get
2 Get
3 Get
4 Get
5 Get
6 Get
7 Get
5.2

Class code 0x03, DeviceNet

For class code 0x03, the following instance ID's are available:
Instance Name
0 Class designator
1 DeviceNet
For class code 0x03, the following class attributes have been implemented:
Attribute Access
1 Get
For class code 0x03, the following instance attributes have been implemented
Attribute Access
1 Set
2 Set
3 Set
4 Set
5 Get
8 Get
9 Get
Changing the MAC ID and Baud rate will not take effect until a reboot has occurred.
SFIDK.PS.023.C2.02
MAG MASS
- -
√ √
Name Data type Description
Vendor ID UINT
Device type UINT
Product code UINT
Revision Struct of
USINT
Status WORD
Serial number UDINT
Product name String
MAG MASS
√ √
√ √
Name Data type Description
Revision UINT
Name Data type Description
MAC ID USINT
Baud rate USINT
BOI BOOL
Bus-off counter USINT
Allocation Struct
information of Bytes
MAC ID
USINT
Switch Value
Baud rate
USINT
switch Value
Description
No attributes are shared between
the instances
Siemens Vendor Code = 862
Generic device = 0
MAG 6000 = 3
MASS 6000 = 4
Software version of DeviceNet option
MAG 6000: MAG 6000 DeviceNet
module
MASS 6000: MASS 6000 DeviceNet
module
Description
Revision of the DeviceNet object
Class
Node address
0: 125kBaud
1: 250kBaud
2: 500kBaud
Set: Reset counter
Get: Actual counter value
Returns the new MAC ID that will
be used after a reboot
Returns the new Baud Rate that
will be used after a reboot
17