Carrier 30RBM 160 Installation, Operation And Maintenance Instructions page 46

Options No.
Super Enviro-Shield 263
anti-corrosion protection
Welded evaporator water 266
connection kit
230 V electric plug 284
Expansion tank 293
Screwed water connection 303
sleeve kit for DSH
Welded water connection sleeve 304
kit for DSH
Set point adjustment by 4-20mA 311
signal
Free-cooling mode drycooler 313
management
46
Description
Extremely durable and flexible epoxy polymer coating applied to
micro-channel heat exchangers via an electro-coating process, with
a final UV protective topcoat. Minimal variation in heat transfer, tested
to withstand more than 6000 hours of constant neutral salt spray as
per ASTM B117, superior impact resistance as per ASTM D2794
Victaulic piping connections with welded joints
230 VAC power supply source provided with plug socket and
transformer (180 VA, 0.8 A)
6-bar expansion tank integrated into the hydronic module (option 116
required)
DSH connections with screw connection sleeves
DSH inlet/outlet welded connection sleeves
Connections to allow a 4-20mA signal input
Control and connections to a free-cooling drycooler 09PE or 09VE
fitted with optional FC control box
Advantages
Improved corrosion resistance, recommended for use in extremely
corrosive environments
Easy installation
Enables connection of a laptop or an electrical device during unit
start-up or servicing
Easy, quick installation (ready to use), and closed circuit protection of
hydraulic systems to counter excessive pressure
Easy to install. Used to connect the unit to a screw connector
Easy installation
Easy energy managment, allow to adjust set point by a 4-20mA
external signal
Easy system management, control capabilities extended to a
drycooler used in free cooling mode
Use
30RBM/30RBP
160-520
30RBM/30RBP
160-520
30RBM/30RBP
160-520
30RBM/30RBP
160-520
30RBM/30RBP
160-520
30RBM/30RBP
160-520
30RBM/30RBP
160-520
30RBM/30RBP
160-520