Voip Trunks; Setup Voip Trunk - Grandstream Networks UCM6102 Basic Configuration Manual

Note: If there are reports of calls being dropped and lines are not disconnecting properly, this could mean
that there are line settings mismatched. The UCM6100 series offers an auto detect feature that tests the
line and provides the best possible settings. This option is called "PSTN Detection" which can be found
under the Analog trunk configuration page.
V IP T
O RUNKS
VoIP trunks can be configured under Web GUI->PBX->Basic/Call Routes->VoIP Trunks. Once created,
the VoIP trunks will be listed with Provider Name, Type, Hostname/IP, Username and Options to
edit/detect the trunk.
•
Click on "Create New SIP/IAX Trunk" to add a new VoIP trunk.
•
Click on to configure detailed parameters for the VoIP trunk.
•
Click on to configure Direct Outward Dialing (DOD) for the SIP Trunk
•
Click on to start LDAP Sync
•
Click on to delete the VoIP trunk.
There are 4 different type of VoIP trunks that can be configured. The types are Peered/Registered SIP
trunk or Peered/Registered IAX trunk. This tutorial will demonstrate how to configure a SIP Registered
Trunk.
S V IP T
ETUP O RUNK
1. Click on "Create New SIP/IAX Trunk"
2. Click the dropdown box for Type and select "Register SIP Trunk"
3. Enter a name for "Provider Name" e.g., GSTrunk
4. Configure the IP address or URL of the VoIP providers server as the "Host Name" e.g.,
sip.grandstream.com
5. Input the username to authenticate with the VoIP provider as the "Username" e.g, 6266389172
6. Enter password for username to authenticate with VoIP provider server
7. Enter the AuthID. This is the SIP service subscriber's ID used for authentication. If not configured,
the CallerID will be used for authentication.
8. Enter an outbound proxy if the provider requires one
9. Click "Save" and then "Apply Changes" at the top
17