Keba KeContact P20 Installation Manual page 45

Connectors
Enable input [X1]:
Potential-free switch contact output [X2]:
Ethernet2 connection (debug) [X3]:
Ethernet1 connection [X4]:
RFID (optional):
Cylinder lock (optional):
Mechanical data
Dimensions (W x H x D):
Weight:
Environmental conditions
Operating temperature at 16A:
Operating temperature at 32A:
Temperature behaviour:
Storage temperature range:
Speed of temperature change:
Permitted relative air humidity:
Altitude:
Further technical instructions
Enable input for external authorization:
Connection line:
- Cross-section (min.-max):
- AWG (min.-max):
Safety extra-low voltage <50V
External current limiting to 0.5A required
Connection line:
- Cross-section (min.-max):
- AWG (min.-max):
RJ45
LSA+ terminals
MIFARE cards or tags according to ISO14443
Profile half cylinder according to EN 1303 or
DIN 18252; Length A=30mm (31mm)
240 x 495 x 163 mm (e.g. Type 2 standard socket)
approx. 4.8 kg (depending on device version)
-25C to +50C
without direct sunlight
-25C to +40C
without direct sunlight
In each case of the specified operating temperature
ranges, the device supplies the charging current
continuously available.
To increase the charging availability, the charging
current setting is changed to 16A, if the tempera-
ture is inadmissible exceeded. Subsequently, the
charging process can also be switched off.
After cooling, the charging current setting is in-
creased again.
-25C to +80C
max. 0.5C /min
5% to 95% non-condensing
max. 2000 m above sea level
0.08 – 4 mm²
28 – 12
50/60Hz
AC
0.08 – 4 mm²
28 – 12
45 / 48