Keba KeContact P40 Pro Operating Instructions Manual
Hide thumbs
Also See for KeContact P40 Pro:
- Quick manual (61 pages) ,
- Installation manual (94 pages) ,
- Manual (24 pages)
Subscribe to Our Youtube Channel
Related Manuals for Keba KeContact P40 Pro
Summary of Contents for Keba KeContact P40 Pro
- Page 1 KeContact P40 / P40 Pro Charging Station Operating instructions V 1.00 Translation of the original instructions...
- Page 2 Specifications are subject to change due to further technical developments. Details presented may be subject to correction. All rights reserved. Reindlstraße 51, 4040 Linz, Austria, www.keba.com/emobility KEBA Energy Automation GmbH +43 732 7090-0, +43 732 7309-10, kecontact@keba.com For information about KEBA and our subsidiaries please look at www.keba.com.
-
Page 3: Table Of Contents
Charging process ...................... Starting the charging procedure............... Ending the charging process ................Error diagnosis ......................10 Short description of the app..................10.1 Establishing an app connection via Bluetooth®..........10.2 Establishing an app connection via LAN/WLAN ..........V1.00 © KEBA 2024... - Page 4 Table of contents P40 / P40 Pro 11 Maintenance....................... 11.1 Cleaning......................11.2 Software update....................12 Disposal........................Index ........................... V1.00 © KEBA 2024...
-
Page 5: Introduction
This symbol reminds you of the possible consequences of touching electro- statically sensitive components. Information Identifies practical tips and useful information. No information that warns about potentially dangerous or harmful functions is contained. V1.00 © KEBA 2024... -
Page 6: Purpose Of The Document
Parents are responsible for their children! Warranty Only general maintenance work that is expressly permitted by KEBA may be performed. Any other tampering to the device will result in a loss of the war- ranty claim. - Page 7 Mention of names The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by KEBA is under license. Other trademarks and trade names are those of their respective owners. V1.00...
-
Page 8: Safety Notes
● Using cable extension sets or adapters of any kind is prohibited. Persons who, due to their special training, expertise and experience as well as knowledge of current standards, are able to assess the work per- formed and the possible hazards. V1.00 © KEBA 2024... - Page 9 Not observing the safety notes can result in risk of death, injuries and damage to the device! The device manufacturer does not accept any liability for claims that result from non-compliance with the safety notes! V1.00 © KEBA 2024...
-
Page 10: Description Of The Charging Station
... Touch button ... Smart charging symbol ... RFID reader ... Charging plug with charging cable ... Plug holder Depending on the design of the charging station, the colors or functions may differ from the illustration. V1.00 © KEBA 2024... - Page 11 The plug holder for the charging cable can be installed directly beneath or separately from the charging station. Information If the plug holder for the charging cable is installed directly beneath the charging station, it can be used to secure the housing cover. V1.00 © KEBA 2024...
-
Page 12: Type Plates
... Serial number / Material number ... Electrical data ... ClimatePartner certification ... CE marking ... Manufacturer address ... Operator information ... UKCA marking/address ... Country of manufacture ... Production location and date ... Serial number as a QR code V1.00 © KEBA 2024... -
Page 13: Product Key (Variants Of The Charging Station)
...Type 2 cable with protective cap ...Cable variant, no cable attached Cable 6 …Cable lenght in meter [m] (0 = no cable) ...1 phase Phases ...3 phases ...3 phases→1 phase (phase switching) ...16 A VIII Maximum Charging Current ...32 A V1.00 © KEBA 2024... - Page 14 Processing unit ...Variant 1 ...not equipped Touch button ...Touch button XXII User interface L ...LED XXIII Future options 0 ...None Options for individual customer versions, not relevant for EU XXIV Customer options xxxx declaration of conformity V1.00 © KEBA 2024...
-
Page 15: Status Displays
Indicates that the LED bar pulses at a consistent speed. Example The light pattern explanations are shown in a short time sequence for a duration of 5 sec- onds. The example shows that the entire LED bar flashes green for 0.5 seconds every 5 seconds. V1.00 © KEBA 2024... - Page 16 The charging process is blocked by the charging sta- tion (e.g. vehicle not ready, switch contact input or load management specification). KEBA eMobility App can be used to start identification of the charging station. The charging station emits a short Flashing green (one cycle) flashing signal and audio signal in order to be identified.
-
Page 17: Displays In Event Of Error
1) Switch off the power supply of the charging station; to do so, switch off the circuit breaker of the supply line. Flashing red 2) Have the charging station checked by an electrician. No power supply or defect. No display V1.00 © KEBA 2024... -
Page 18: Integrated Energy Meter
● Calibrated energy meter: Variants with this option are suitable for the measurement of active en- ergy in accordance with MID or MessEV. With these devices, there is a corresponding identifier on the type plate. V1.00 © KEBA 2024... -
Page 19: Displays With Calibratable Energy Meter (Mid)
If a meter value is displayed, the meter value is correct. Identification data for the current charging session, for ID: xxxx traceability of the transaction in billing. EUR/kWh Rate information of the operating company. V1.00 © KEBA 2024... -
Page 20: Optional Operating Elements
In this case, the charging current limit can be waived once for the current charging session using the touch but- ton (1) (contact surface), if this is permitted by the grid operator. This charges the vehicle faster, if needed. V1.00 © KEBA 2024... -
Page 21: Smart Charging Symbol
(e.g. due to a network problem). The animation follows the display on the light bar. Orange The charging station is in a critical error state. The animation follows the display on the light bar. V1.00 © KEBA 2024... -
Page 22: Authorization
(with audio signal). Flashing blue The RFID card has been accepted and the charging process can start (with audio signal). Flashing blue/green (one cycle) The RFID card has been rejected (with audio signal). Flashing blue/orange (one cycle) V1.00 © KEBA 2024... -
Page 23: Managing (Teaching In/Deleting) Rfid Cards
By default, a charging procedure can be started without authorization. In or- der to use the authorization via RFID, RFID cards first need to be taught in. KEBA eMobility App or the optional KEBA eMobility Portal can be used for managing (teaching in or deleting) RFID cards. -
Page 24: Charging Process
1) End the charging process on the vehicle. 2) Unplug the charging cable from the vehicle. 3) Stow the charging cable and plug the charging plug into the plug holder of the charging station. The charging process is completed. V1.00 © KEBA 2024... -
Page 25: Error Diagnosis
Contact your service partner. If you have any questions or problems, please contact your service partner. For this purpose, make a note of the product designation and serial number of the device (see "3.2 Type plates"). V1.00 © KEBA 2024... -
Page 26: Short Description Of The App
Short description of the app P40 / P40 Pro Short description of the app KEBA eMobility App is an extended user interface for the charging station and can be used for the following applications: ● View the current status. ●... - Page 27 User PWD password (see sticker on the back side of the included short manual) Possible settings are: LAN, WLAN, User mode WLAN hotspot ● Start and stop charging processes ● Comprehensive configuration options (interfaces) ● RFID card management ● And much more V1.00 © KEBA 2024...
-
Page 28: Establishing An App Connection Via Bluetooth
P40 / P40 Pro 10.1 Establishing an app connection via Bluetooth® For the initial use of KEBA eMobility App and for configuring or operating the charging station, proceed as follows: 1) Install KEBA eMobility App on your mobile device. ®... -
Page 29: Establishing An App Connection Via Lan/Wlan
To use the app, proceed as follows: 1) Start KEBA eMobility App and establish the connection to the charging station. Re-entering the PIN is not necessary. The connection to the charging station is established. -
Page 30: Maintenance
● Regularly clean the exterior housing parts. ● If the cleaning notes are not observed, severe contamination (especially bird droppings) can lead to discoloration, yellowing and damage to the housing material. V1.00 © KEBA 2024... -
Page 31: Software Update
Software update with KEBA eMobility App To update the software of the charging station, proceed as follows: 1) Open KEBA eMobility App and connect with the charging station. 2) A more recent software version is shown in the app. The update process can be started directly from there. - Page 32 WLAN connection Software update via KEBA eMobility Portal If the charging station is registered in KEBA eMobility Portal and connected with it, a software update can be initiated conveniently through the portal. In the portal, the RAUC update method can also be selected, for example.
-
Page 33: Disposal
The materials are recyclable in accordance with their labeling. You can make an important contribution to protecting our environment by reusing, renewing and recycling materials and old appliances. Sustainability Please consider the environment. The device contains valuable raw materi- als which should be recycled. V1.00 © KEBA 2024... -
Page 34: Index
Starting the charging procedure.... 24 Intended use.......... 6 Touch button .......... 20 LED bar ........... 15 Type plates Authorization functions .... 16, 22 Charging station ........ 12 Common operating states.... 16 Position.......... 12 Display information ...... 15 Error states ......... 17 V1.00 © KEBA 2024... - Page 36 KEBA Energy Automation GmbH Reindlstraße 51 4040 Linz / Austria www.keba.com...
Need help?
Do you have a question about the KeContact P40 Pro and is the answer not in the manual?
Questions and answers