Log - D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual

Log

On the System / Log page, you can set the system log options and configure sending the system
log to a remote host and/or a USB storage
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
17 This function will be implemented in further versions of the firmware.
17 connected to the router.
Figure 149. The System / Log page. The Settings tab.
Page 192 of 210
Configuring via Web-based Interface