DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Back and Bottom Panels
Port
DSL
LAN 1-4
USB
WPS
WIRELESS
ON/OFF
ON/OFF
12VDC IN
The RESET button located on the bottom panel of the router is designed to restore the factory
default settings. To restore the factory defaults, push the button (with the device turned on), hold it
for 10 seconds, and then release the button.
Figure 2. Back panel view.
A DSL port to connect the router to the telephone line.
4 Ethernet ports to connect Ethernet devices. One port can be used to
connect to a private Ethernet line.
A port for connecting a USB device (modem, storage, printer).
A button to set up a wireless connection (the WPS function).
To use the WPS function: with the device turned on, push the button and
immediately release it. The WPS LED should start blinking.
A button to enable/disable the router's wireless network.
A button to turn the router on/off.
Power connector.
Page 13 of 210
Description
Overview