Selecting Operation Mode - D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual

Selecting Operation Mode

In order to connect your device to an ADSL line, on the Device mode page, from the
Connection method list, select the ADSL value. In this mode you can configure a WAN
connection, set your own settings for the wireless network, configure LAN ports to connect an STB
or VoIP phone, and set your own password for access to the web-based interface of the device.
Figure 25. Selecting an operation mode. The ADSL connection method.
In order to connect your device to an Ethernet line, on the Device mode page, from the
Connection method list, select the Ethernet (LAN) value. In this mode you can configure a
LAN port as a WAN port, configure a WAN connection, set your own settings for the wireless
network, configure LAN ports to connect an STB or VoIP phone, and set your own password for
access to the web-based interface of the device.
Figure 26. Selecting an operation mode. The Ethernet connection method.
Page 39 of 210
Configuring via Web-based Interface