D-Link DSL-2750U User Manual page 121

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
In the Security Settings section, you can change security settings of the wireless network.
By default, the WPA2-PSK network authentication type of the wireless network is specified. WPS
PIN from the barcode label is used as the network key.
Figure 95. Network authentication types supported by the router.
The router supports the following authentication types:
Authentication type
Open
WEP-64
WEP-128
WPA
WPA-PSK
WPA2
WPA2-PSK
WPA/WPA2 mixed
Open authentication (with WEP encryption for wireless network
modes not supporting 802.11n devices).
Authentication with a 64-bit shared key with WEP encryption. This
authentication type is not available when a mode supporting 802.11n
devices is selected from the Wireless mode drop-down list on the
Wi-Fi / Basic Settings page.
Authentication with a 128-bit shared key with WEP encryption. This
authentication type is not available when a mode supporting 802.11n
devices is selected from the Wireless mode drop-down list on the
Wi-Fi / Basic Settings page.
WPA-based authentication using a RADIUS server.
WPA-based authentication using a PSK.
WPA2-based authentication using a RADIUS server.
WPA2-based authentication using a PSK.
A mixed type of authentication. When this value is selected, devices
using the WPA authentication type and devices using the WPA2
authentication type can connect to the wireless network.
Page 121 of 210
Configuring via Web-based Interface
Description