Lan; Ipv4 - D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual

LAN

To configure the router's local interface, go to the Connections Setup / LAN page.

IPv4

Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC
address and IP address pairs.
Figure 87. Configuring the local interface. The IPv4 tab. The Local IP Address section.
Parameter
IP address
Subnet mask
Device domain name
Figure 88. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Local IP Address
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.1.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
The name of the device attached to its IP address in the local subnet.
Page 110 of 210
Configuring via Web-based Interface
Description