D-Link DSL-2750U User Manual page 77

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Figure 59. The page for creating a new Static IPv6 connection. The IPv6 section.
Parameter
IPv6 address
Prefix
Gateway IPv6 address
Primary IPv6 DNS
server/Secondary IPv6
DNS server
Get IPv6
Gateway by SLAAC
Gateway IPv6 address
Obtain DNS server
addresses
automatically
IPv6
For Static IPv6 type
Enter an IPv6 address for this WAN connection.
The length of the subnet prefix. The value 64 is used usually.
Enter an IPv6 address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
For Dynamic IPv6 type
Select a method for IPv6 address assignment from the drop-down
list or leave the Automatically value.
Move the switch to the right to automatically assign the IPv6
gateway address with help of SLAAC (Stateless Address
Autoconfiguration).
The address of the IPv6 gateway. The field is available for editing,
if the Gateway by SLAAC switch is moved to the left.
Move the switch to the right to configure automatic assignment of
IPv6 DNS server addresses. Upon that the Primary IPv6 DNS
server and Secondary IPv6 DNS server fields are not available
for editing.
Page 77 of 210
Configuring via Web-based Interface
Description