D-Link DSL-2750U User Manual page 198

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Figure 154. The System / Traceroute page. The additional settings window.
In the opened window, you can specify the following parameters:
Parameter
Maximum TTL value
Number of probes
Wait time
To restore the default field values, click the DEFAULT SETTINGS button.
After specifying the additional parameters, click the OK button.
To run the check, click the START button. After a while, the results will be displayed on the page.
To remove the check result from the page, click the CLEAR button.
Specify the TTL (Time to live) parameter value. The default value is
30.
The number of attempts to hit an intermediate host.
A period of waiting for an intermediate host response.
Page 198 of 210
Configuring via Web-based Interface
Description