D-Link DSL-2750U User Manual page 54

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
In the WAN section, click the Add icon (
You can specify the following parameters:
Parameter
Name
Interface
VPI
VCI
Encapsulation
QoS class
).
Figure 40. Adding a connection.
A name for the connection for easier identification (you can specify
any name).
Select the value corresponding to the LAN port specified as the
WAN port for connection to an Ethernet line or the DSL value for
connection to an ADSL line.
For the DSL value only.
Virtual Path Identifier. The valid range is from 0 to 255.
For the DSL value only.
Virtual Circuit Identifier. The valid range is from 32 to 65535.
For the DSL value only.
Select LLC or VCMUX from the drop-down list.
For the DSL value only.
A class of traffic for this connection.
UBR
(Unspecified Bit Rate): The UBR service is used for applications that
allow various delays and losses of packets. It is appropriate to use
the UBR service for text/data/image transfer applications, as well as
messaging, distribution, retrieval, and remote terminal applications.
UBR with PCR
Page 54 of 210
Configuring via Web-based Interface
Description