Filling The Internal Water Tank - Expobar QUARTZ User Manual

OPERATION

Filling the internal water tank

For machines connected to a tank, if the water level of the tank reaches the minimum level while trying to
dispense a drink, the brewing will stop and the LEDs on the keypad will begin to flash.
Proceed as follows:
A
If the water level of the tank is below the
minimum level(A), All buttons will begin to flash
as seen in picture(B).
Lift up the tank lid.
IMPORTANT!
Note
Always switch the machine off before removing the tank.
10
B
01
Switch off the machine by pressing the power
switch.
03
Turn the handle that secures the tank upwards,
pull it straight up until it release from the
machine. Fill it with fresh tap water to the
maximum level indication.
QUARTZ
02
04