Table of Contents
Advertisement
•
iLO User Guide on the Hewlett Packard Enterprise website
•
Intelligent Provisioning User Guide on the Hewlett Packard Enterprise website
HPE ProLiant Pre-boot Health Summary
If the server will not start up, you can use iLO to display diagnostic information on an external monitor.
This feature is supported on servers that support external video and have a UID button or an SUV
connector. When power is available to the server but the server is not powered on, iLO runs on auxiliary
power and can take control of the server video adapter to display the HPE ProLiant Pre-boot Health
Summary.
For additional information, see the following documents:
•
iLO 4 User Guide — See the Hewlett Packard Enterprise website.
•
ProLiant Gen9 Troubleshooting Guide, Volume I: Troubleshooting — See Troubleshooting
resources.
Integrated Management Log
The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each
event with 1-minute granularity.
You can view recorded events in the IML in several ways, including the following:
•
From within HPE SIM
•
From within operating system-specific IML viewers:
◦
For Windows: IML Viewer
◦
For Linux: IML Viewer Application
•
From within the iLO web interface
•
From within Insight Diagnostics
UEFI System Utilities
The UEFI System Utilities is embedded in the system ROM. The UEFI System Utilities enable you to
perform a wide range of configuration activities, including:
•
Configuring system devices and installed options
•
Enabling and disabling system features
•
Displaying system information
•
Selecting the primary boot controller
•
Configuring memory options
•
Selecting a language
•
Launching other pre-boot environments such as the Embedded UEFI Shell and Intelligent Provisioning
For more information on the UEFI System Utilities, see the UEFI System Utilities User Guide for HPE
ProLiant Gen10 Servers on the Hewlett Packard Enterprise website.
Scan the QR code located at the bottom of the screen to access mobile-ready online help for the UEFI
System Utilities and UEFI Shell. For on-screen help, press F1.
Using UEFI System Utilities
To use the UEFI System Utilities, use the following keys.
HPE ProLiant Pre-boot Health Summary
51
Hide quick links:
Advertisement
Table of Contents
