Power-Pro Cot User Controls; Using The Cot Control Switches - Stryker Power-LOAD User Setup Manual

USING THE COT CONTROL SWITCHES

There are two cot control switches located on the Power-PRO cots (models 6500/6506 and 6510/6516). Press the
buttons on either of these switches to extend the cot, retract the cot, or release the cot from Power-LOAD.
This figure and table highlight the three buttons located on the cot control switch.
Ref Name
1 Release
2 Retract (-)
3 Extend (+)
Return To Table of Contents
44

Power-PRO Cot User Controls

2
Description
Press to unlock the cot from Power-LOAD.
Press and hold to fully retract the cot undercarriage until the cot is
supported.
Press and hold to fully extend the cot undercarriage until the cot
wheels are on the ground.
6390-009-001 REV B
1
www.stryker.com
3