4-1-4
Installation Orientation
The Slave Terminal can be installed in any of the following six orientations.
(A) is the upright installation orientation and (B) to (F) are installation orientations other than upright.
(A)
(B)
However, there are restrictions on the installation orientation and restrictions to the specifications that
can result from the Communications Coupler Units and NX Units that are used.
For detailed restrictions, refer to the user's manuals for the Communications Coupler Unit, NX Units,
and NX-series System Units that you will use.
NX-series Position Interface Units User's Manual (W524)
(C)
(D)
4 Installation and Wiring
(E)
(F)
Up
Down
4
4 - 7