Operating Instructions - ProFusion PH-9100WRN Owner's Manual

OPERATING INSTRUCTIONS

WARNING -
used.
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR
ARC FLASH:

Apply appropriate personal protective equipment (PPE)
and follow safe electrical work practices. See NFPA 70.

A circuit breaker must be installed and serviced only by a
qualified electrical personnel.

Always use a properly rated voltage sensing device to
confirm power is off.
The switch on the heater is to start the Fan and Heater.
Use the circuit breaker as power ON/OFF device. The
circuit breaker is to be installed by certified
electrician and shall be located in line of sight from
the heater location or shall be capable of being locked
in open position. Follow the operating instruction to
reduce the risk of fire, electric shock, injury or death
to persons.

Switch on the circuit breaker.

Insert the batteries to the remote controller as below images:
NOTE: Remove the batteries if the remote control is not to be
used for a month or more. Batteries left in the unit may leak
and cause damage.
The heater must be properly installed before it is
11