READ AND SAVE THESE INSTRUCTIONS Customer Service: 1-888-538-0082 Service Email: service@hena.ca READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION FAILURE TO COMPLY WITH INSTRUCTION COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.
Page 3
authorized service facility for examination, electrical or mechanical adjustment, or repair. 7. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER locate heater where it may fall into a bathtub or other water container. To protect against electrical hazards, DO NOT immerse in water or other liquids.
19. Always use on a dry, level surface. 20. DO NOT use outdoors. 21. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any solid-state speed/dimmer control device. 22. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit.
SAFETY FEATURES Polarized Plug Warning: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug.
PRODUCT DIAGRAM OPENING INSTRUCTIONS 1. Carefully remove the heater from carton and the bag. Make certain the unit is in the OFF position before plugging the heater into the power outlet.
2. Before using the heater, make sure that it is on a flat and stable surface. Damage may occur if it is placed in an incline or decline. 3. Turn off all the controls of the heater, and then plug the heater power cord directly into a standard grounded AC outlet.
CAUTION: DO NOT let liquid enter the heater. 3. DO NOT use alcohol, gasoline, abrasive powers, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 4. DO NOT immerse the heater in water. 5.
Need help?
Do you have a question about the QH-1 and is the answer not in the manual?
Questions and answers