ProFusion PH-9100WRN Owner's Manual page 4

8) Do not install less than 6 feet(1.8 m in U.S.A) / 8 feet (2.4 m in
Canada) high from the floor and closer than 1 foot (0.3m) to any
adjacent vertical surfaces or walls. Keep at least 4.5 inches (11.5cm)
from the back wall (with or without using the wall hanging mounting
bracket).
9) Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater.
10) To prevent a possible fire, do not block air intakes or exhaust in
any manner.
11) A heater has hot and arcing or sparking parts inside. To reduce
the risk of fire, do not use it in areas where gasoline, paint, or
flammable vapors and liquids are used or stored.
12) Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric
shock, or injury to persons.
13) This product must be installed by a certified electrician, in
accordance with local codes.
2
14) For supply cables, use 6AWG (13.3 mm ) copper wires.
15) WARNING – RISK OF FIRE, DO NOT USE AS A RESIDENTIAL
OR HOUSEHOLD HEATER.
CAUTION – High temperature, risk of fire, keep electrical cords,
drapery, furnishings, and other combustibles at least 3 feet
(0.9 m) from the front of the heater and away from the side and
rear.
SAVE THESEINSTRUCTIONS
WARNING – RISK OF FIRE, DO NOT USE AS A
RESIDENTIALOR HOUSEHOLD HEATER.
4