Data Record : How To Record - GRAPHTEC GL840 Quick Start Up Manual

3. Data record : How to Record

Once required settings are saved,you can record data while it is in process.
Recoded data is available for replay.
Recorded Data can be viewed while it is in progress by pressing the [REVIEW] key.
Data is available for viewing from the start to the point of real time recording while in
progress.
During the replay, arbitrary level values can be viewed by moving the cursor.
Return to the data capture screen by pressing the [REVIEW] key again.
* The [DISPLAY] key allows users to switch between the 1-screen and 2-screen.
15
1. Start data recording
(1) Push the [START/STOP] key.
(2) A confirmation message is displayed.
(3) Push the [ENTER] key to start data record.
2. Screen status during data recording
Once data recording starts, progress is visible on the screen.
The displayed time counts up or down.
Recording message
elapsed time
(The indication becomes ++++ when the available recording time is 9999 hours or more.)
Key Pointers
3. Stop recording
Push the [START/STOP] key to end the data recording.
(1) Push the [START/STOP] key.
(2) Confirmation message is displayed. Push the [ENTER] key.
(3) Recording ends, and the GL840 goes into the Free Running mode.
The operation of data recording is complete.
remaining time for data record