Table of Contents
Advertisement
3. Referring to the table below, set the appropriate file filters, then select [OK].
Filter type
[Specify Date]
Apply a filter based on date. You can select a single filter (for exam-
ple, filter by month only) or a mixed filter (for example, filter by year,
month and date).
[Specify Position] Apply a filter based on a specific location and/or a nautical mile ra-
dius from the specified point.
[Specify Record]
Apply a filter based on the playback time of the record, the depth re-
corded, or a mix of time and depth.
• [Minimum Time]/[Minimum Depth]: Records with a time/depth be-
• [Maximum Time]/[Maximum Depth]: Records with a time/depth
4. Select the file to play back, then select [OK]. The selected file is played back.
Some settings, such as gain and fish size measurements, can be adjusted during
playback.
No.
Name
1
[Pause] icon
2
[Stop] Icon
3
[Settings] icon
4
[Loop] icon
5
[Playback Location]
indicator
6
[Playback Speed]
5. Select the Stop icon (
low this setting are not displayed.
above this setting are not displayed.
Select to pause the playback. Select the [Play] icon to con-
tinue playback.
Select to stop the playback.
Apply your current settings to the playback file. This icon is
shown in green color when in use.
Select to loop the playback.
Indicates your current location in the overall playback. Se-
lect the slide bar, then drag the locater to change the play-
back location.
Select the speed to playback the record. The available op-
tions are:
• [2000]/[1500]/[1000]/[500] ms: Play the record at the set
millisecond speed.
• [RT]: Play the record at real time speed (the speed at
which it was recorded).
• [MAX]: Play the record at maximum playback speed.
) to stop the playback.
3. STILL IMAGES & DATA RECORDING
Description
Description
3-7
Advertisement
Table of Contents
Troubleshooting
