Table of Contents
Advertisement
Error message
Error Code: P03/
Immediately turn off the power of processor unit and contact your dealer.
5. MAINTENANCE AND TROUBLESHOOTING
Icon
Possible cause/remedy
Communication error between the trans-
ducer and processor unit. Check the
connection between the transducer and
processor unit.
Error in the processor unit.
Turn the equipment off, then contact
your local dealer for service.
• Communication error between the ex-
ternal fish finder and processor unit.
Check the connection between the ex-
ternal fish finder and processor unit or
the connection between the Ethernet
HUB (HUB-101) and the external fish
finder.
• This error also appears if, when using
a DFF3 fish finder, the FCV-2100
power is not turned on within approxi-
mately one minute of turning the pow-
er on for the DFF3. Connection can
take up to seven minutes. When the
connection is complete, this error dis-
appears.
5-5
Advertisement
Table of Contents
Troubleshooting
