Set Upload Interval Time; Senior Operation & Setting; Check Authorized Phone Number By Sms; Delete Authorized Phone Number By Sms - Carscop CCTR-800G User Manual

working mode, it is 1,or 3. if the "X" is 3, the SMS command should be "MODE*123456*3*Y" , "Y" is the sleep
time from 01-99, unit is hour. after receive the command, the tracker will reply SMS "Working mode set to X (1
Working,3 Cycle On/Off GPRS)" . The working modes are described below:
Mode 1 (Factory Mode) ------ Continuously Working (Locate every 30 seconds )
This mode is the default working mode. under this mode, the tracker can receive SMS or calling, locate
and report by GPRS to the sever per 30 seconds.
Mode 3 ------ Cycle ON/OFF & Upload Location to Server by GPRS
Under this mode, the system ON / OFF is controlled by timer (interval time is Y hours). The tracker will
power on automatically and locate with GPS and then upload the location information to server by GPRS, and
then a few minutes later, the tracker will power off automatically, and the timer will begin to count, after the time
is up, the tracker will power on again and then locate & upload the current location to server by GPRS, and
power off again. and waiting the timer is up and repeat the above process. The battery power cost is very low
in mode 3, normally this mode is used for checking location every setting time (For example check one time
every day or every hour), not used for real time tracking.
6、Set Upload Interval Time
Send SMS "INTERVAL*123456*T" to the tracker, "INTERVAL" is command, "123456" is password, "T" is
the interval time from 30 to 999, unit is second. The tracker will send back information "Set Interval time T OK",
if the password is not right, the operation is fault, the tracker will send back information "Wrong Password". 30
seconds is the default interval time. Longer upload interval time can save battery and GPRS data cost, the total
mileage on the platform will have big error if the interval time is bigger than 30 seconds.
Senior Operation & Setting

1. Check Authorized Phone Number by SMS

Send SMS "CHECKPHONE*123456" to the tracker number,
password; the tracker will send back the information
13876543210；C：13765432100 , the phone number is just an example.

2. Delete Authorized Phone Number by SMS

Send SMS "DELETEPHONE*123456*A" to the tracker number, "DELETEPHONE" is command; "123456"
is password; "A" is authorized phone number location, there are 3 locations "A" and "B" and "C"; if the delete
operation is success, the tracker will send back the information "Delete Authorized Phone OK".
3. Check Tracker Password
Send SMS "CHECKPASSWORD#" to the tracker number, "CHECKPASSWORD" is command, if the
operation is success, the tracker will send back the information "Password：888888"; "888888"is an example.
The tracker password is used to protect the tracker only can be operated by owner, every SMS command
need follow tracker password, the default tracker password is 123456, for higher security please change the
"CHECKPHONE" is command; "123456" is
"Authorized Phone
7
- -
A: 13987654321 ； B ：