Setting Hmx6800+Bc8 Remote Control Parameters - Imagine communications Selenio 6800 Installation And Operation Manual

Chapter 3: Operation

Setting HMX6800+BC8 Remote Control Parameters

Table 3-9. HMX6800+BC8 Parameters—Remote Control Only
Path
General
AES
Metadata
50
Table 3-9 lists all of the remote control parameters and options for the
HMX6800+BC8. To access these parameters, you must use + Pilot Lite
or CCS control software such as Pilot or Navigator. See your software
user manual for more information.
Note that rows in the table that contain a range of numbers in
parentheses indicate that a series of numbered parameters contain that
same function and range.
Legend
Bold option=Indicates that this is the default setting for the parameter.
Rows of the table that are in grey are read-only parameters.
All parameters clip unless otherwise indicated.
Parameter
Function
Name
Serial Number Displays the module's
unique identifier
Factory Recall Recalls the factory
default settings
Audio Input Type Selects the type of
Select AES input
AES (1 to 8) Input Reports the presence
Present of the specified AES
input signal
External Metadata Reports the presence
Present of external serial
metadata
Metadata Interface Selects the metadata
Type interface type
Options or User Range
(string)
• No
• Yes
• Balanced
• Unbalanced
• No
• Yes
• No
• Yes
• RS-232
• RS-422
HMX6800+BC8 Installation and Operation Manual