Setting Hmx6800+Bc8 Control Parameters - Imagine communications Selenio 6800 Installation And Operation Manual

Chapter 3: Operation

Setting HMX6800+BC8 Control Parameters

Note
The sequence of options
listed in the Options column
mirrors the sequence
achieved when you move the
Navigation Toggle switch
up.
Table 3-8. Card-Edge Parameter Options—HMX6800+BC8 Modules
Bank,
Rotary Parameter Name
Switch
0, 1 SDI Input Video Standard Set
0, 2 Y CRC Error Counter Clear
0, 3 C CRC Error Counter Clear
0, 4 EDH Error Counter Clear
38
Table 3-8 lists all of the card-edge parameters and options for the
HMX6800+BC8. All parameters clip unless otherwise indicated.
The On/Off combinations of the control LEDs on the card-edge indicate
the active bank number. See
for more information.
Legend
Bold option=Indicates that this is the default setting for the parameter.
Function
Selects the SDI input
video signal standard
Clears the luminance
CRC error counter
Clears the
chrominance CRC
error counter
Clears the EDH error
counter
"Changing Parameter Settings" on page 36
Options
• Auto
• SD 525
• SD 625
• 1080I 25 (295M)
• 1080I 30
• 1080I 29.97
• 1080I 25
• 1080P 30
• 1080P 29.97
• 1080P 25
• 1080P 24
• 1080P 23.98
• 1080PsF 24
• 1080PsF 23.98
• 720P 60
• 720P 59.94
• 720P 50
• No
• Yes
• No
• Yes
• No
• Yes
HMX6800+BC8 Installation and Operation Manual