Imagine communications Selenio 6800 Installation And Operation Manual page 36

HMX6800+BC8 Installation and Operation Manual
7. On the Device tab of the Navigation Properties box, enter the IP
address of the frame that holds the module. (See
Enter frame IP
address here
Figure 2-6. Navigation Properties Box
Caution
If you make changes in the last field (located above and to
the right of the Set Default button), you may lose your
connection to the module. If this happens, you will need to
rediscover the module.
8. In the third field, enter
1.0.[slotnumber]
(In this example, 1.0.5 refers to the module in slot 5 of the frame.)
9. Close the window.
Chapter 2: Installation
Figure 2-6.)
Do not make changes in
this field
23