Installing 6800+ Modules
Required Frames and Back Connector Types
Installing and Removing Modules
HMX6800+BC8 Installation and Operation Manual
The HMX6800+BC8 modules have double-width back connectors that
can be installed in anor FR6802+QXF frame. HMX6800+BC8
modules cannot be installed in a FR6802+DM frame, a FR6800/7000
frame, or a frame without fans.
See the FR6802+ Frame Installation and Operation Manual for details
on installing back connectors in an FR6802+ frame.
A FR6802+RM (rear support extension rails for 6800+ series frames)
option is recommended for the HMX6800+BC8 modules. See your
FR6802+ Frame Installation and Operation Manual for installation
instructions.
These modules require no specialized installation or removal
procedures. However, if installing both front and rear modules, ensure
that the back module is installed first before plugging in the front
module. When removing both the front and rear modules, ensure that
the front module is unplugged from the frame first, before removing the
rear module.
•
See the FR6802+ Frame Installation and Operation Manual for
information about installing and operating an FR6802+ frame and
its components.
•
See the 6800+ Safety Instructions and Standards Manual for
important information about safely installing your module.
Once you have installed your HMX6800+BC8 modules, you can
connect them to the appropriate input and outputs.
Chapter 2: Installation
17